BRSVF - QUAKER STATE HIGH PERFORMANCE GEAR LUBRICAN

  • MSDS: BRSVF
  • Manufacturer: QUAKER STATE CORP
  • Product Name: QUAKER STATE HIGH PERFORMANCE GEAR LUBRICAN
  • National Stock Number: 9150-01-035-5393
Product Identification

Product ID:QUAKER STATE HIGH PERFORMANCE GEAR LUBRICAN
MSDS Date:07/29/1985
FSC:9150
NIIN:01-035-5393
MSDS Number: BRSVF

Responsible Party
QUAKER STATE CORPORATION
OIL CITY, PA 16301

Emergency Phone: 814-676-7676

Info Phone: 814-676-7676

Preparer: D.W. CRALLEY

Cage: DO899

Contractor
QUAKER STATE OIL REFINING CORPORATION
OIL CITY, PA 16301 US

Telephone: 814-676-7676

Cage: DO899

Ingredients

MINERAL OIL, PETROLEUM DISTILLATES, ACID-TREATED HEAVY

CAS: 64742-18-3

RTECS: PY8032000

Fraction By Weight: >90%

ACGIH TLV: 5 MG/CUM


ADDITIVES

Fraction By Weight: <10%


OLEFIN SULFIDE

CAS: 72162-26-6

Fraction By Weight: 2-4%


ALKYLAMINE SALTS OF PHOSPHORIC ACID ESTERS

CAS: 71888-91-0

Fraction By Weight: 0-2%

Hazards

LD50 LC50 Mixture:TLV: MINERAL OIL 5 MG/M3
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: SWALLOWING-NOT EXPECTED TO BE
ACUTELY TOXIC BY INGESTION. INHALATION-NOT EXPECTED TO BE TOXIC BY
INHALATION. SKIN-MATERIAL EXPECTED TO CAUSE NO MORE SKIN IRRITATION
FOLLOWING PROLONGED &/OR REP EATED CONTACT. EYEY-MAY CAUSE MINOR
EYEIRRITATION. CHRONIC: NONE KNOWN.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION-HOWEVER, BREATHING MINERAL OIL MISTS
AT LEVELS ABOVE THE TLV MAY CAUSE RESPIRATORY IRRITATION AND
POSSIBLE DISCOMFORT.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:SWALLOWING-IF LARGE QUANTITIES ARE SWALLOWED, GIVE VICTIM
WATER, INDUCE VOMITING & CONTACT A PHYSICIAN. SKIN-WASH SKIN
THOROUGHLY WITH SOAP & WATER. INHALATION: IF RESPIRATORY DISCOMFORT
OCCURS, REMOV E PERSON FROM EXPOSURE. CONTACT A PHYSICIAN IF
DISCOMFORT CONTINUES. EYES: FLUSH WITH WATER FOR 15 MINS. IF
IRRITATION CONTINUES, CONTACT PHYSICIAN.

Fire Fighting

Flash Point Method:PMCC
Flash Point:293F,145C
Extinguishing Media:CO2, DRY CHEMICAL, FOAM & WATER SPRAY. ON LARGE
STORAGE FIRES, WATER SPRAY MAY BE INEFFECTIVE.
Fire Fighting Procedures:FOR LARGE STORAGE FIRES INVOLVING THIS
MATERIAL/LUBRICATING PRODUCTS, DO NOT ENTER ANY ENCLOSED SPACE
WITHOUT FULL PROTECTIVE EQUIPMENT INCLUDING SCBA.
Unusual Fire/Explosion Hazard:NONE. INCOMPLETE COMBUSTION CAN PRODUCE
CARBON MONOXIDE.

Accidental Release

Spill Release Procedures:CLEAN UP SPILLS AS SOON AS POSSIBLE. ABSORB
LARGE SPILLS W/AABSORBENT MATERIALS, AS ABSORBENT CLAY.

Handling

Handling and Storage Precautions:DO NOT STORE NEAR HEAT OR OPEN FLAMES.
Other Precautions:HANDS & OTHER EXPOSED AREAS SHOULD BE WASHED
THOROUGHLY W/SOAP & WATER AFTER CONTACT, ESPECIALLY BEFORE EATING
&/OR SMOKING.

Exposure Controls

Respiratory Protection:NOT APPLICABLE FOR INTENDED USE. HOWEVER, IF
UNUSUAL OPERATING CONDITIONS CREATE CONCENTRATIONS IN EXCESS OF THE
TLV, AN APPROVED RESPIRATOR IS RECOMMENDED.
Ventilation:SPECIAL VENTILATION IS NECESSARY ONLY IF UNUSUAL OPERATING
CONDITIONS CREATE CONCENTRATIONS IN EXCESS OF THE TLV.
Protective Gloves:IMPERVIOUS PROTECTIVE GLOVES.
Eye Protection:SAFETY GLASSES OR A FACESHIELD.
Other Protective Equipment:NONE NORMALLY NECESSARY FOR INTENDED USE.
Work Hygienic Practices:AS W/ALL PRODUCTS OF THIS NATURE, GOOD PERSONAL
HYGIENE IS ESSENTIAL. WASH HANDS THOROUGHLY W/SOAP & WATER BEFORE
EATING
Supplemental Safety and Health
AVOID PROLONGED OR FRQUENTLY REPEATED SKIN CONTACT WITH THIS MATERIAL.

Chemical Properties

HCC:V6
Spec Gravity:0.889
Solubility in Water:INSOLUBLE
Appearance and Odor:DARK COLORED LIQUID, PUNGENT ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:HIGH TEMPERATURES & OPEN FLAME.
Hazardous Decomposition Products:CARBON DIOXIDE, WATER VAPOR. MAY
PRODUCE OXIDES OF SULPHUR, CALCIUM, BARIUM, BORON, ZINC, NITROGEN &
PHOSPHORUS.

Disposal

Waste Disposal Methods:PLACE CONTAMINATED MATERIAL IN DISPOSABLE
CONTAINERS & BURY IN AN APPROVED LANDFILL SITE PER LOCAL, STATE &
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.